Shop for Water
Fountain Jets and Nozzles Online
Water Fountains,
Water Features Jets and Nozzles |
|
Aerator Jets
Solid Brass Aerator Jets
This jet will add air to the water that is
shooting up out of the nozzle, thus giving a
white appearance, and creating a fountain effect
that visually stands out. They can be used as a
low lying jet or a high streaming effect to 35
feet. This is a water level dependant jet, that
is both beautiful alone or in clusters. The jet
incorporates a swivel, that allows for easy
vertical adjustments, it screws on to a male
thread nipple for easy installation.
This jet comes in two sizes.
- CW-150-AJ: 1.5" PVC Pipe it is 7 3/8" tall.
Spray Height: 1'6" -15'Spray Diameter: 2'-8'
- CW-200-AJ: 2" PVC Pipe it is 8 1/4 " tall.
Spray Height: 1'6"-24' Spray Diameter: 2'-8'
|
Bubbler Jets
Solid Brass Bubbler Jets
This water jet will add air to the water that
gives white stream look. This nozzle is used in
multiples to get an elegant effect. This will
make your water fountain stand out and with
lights under it, it gives a great showy look.
This is a water level dependent jet, that is both
beautiful alone or in clusters. The jet
incorporates a swivel, that allows for easy
vertical adjustments, it screws on to a male
thread nipple for easy installation.
This nozzle comes in three sizes:
- CW-100-BJ: Fits a 1" PVC, it is 5 1/4" tall
Spray Height: 1' Spray Diameter: 1'6" - CW-150-BJ: Fits a 1.5" PVC, it is 6 1/8"
tall
Spray Height: 1'4" Spray Diameter: 3'
- CW-200-BJ: Fits a 2" PVC, it is 6 7/8" tall
Spray Height: 1'6" Spray Diameter: 3'8"
|
Cascade Jets
Solid Brass
Cascade Jets
This jet actually grabs water that is surrounding it; thus giving a white
appearance, shooting up more water, than the pump is actually pumping. This creates a fountain effect that visually stands out. This adds a very showy and graceful appearance to any water feature. It is always regarded as a favorite! It is one of the most commonly known and used jets. They can also be used as a low lying jet, or very high shooting jet, we have even used these as arching jets for a very stunning look. This is a water level
dependent jet, that is both beautiful alone or in clusters. The jet incorporates a swivel, that allows for easy vertical adjustments, it screws on to a male thread nipple for easy installation.
This nozzle comes in three sizes:
- CW-075-CJ:
Fits a 3/4" PVC, and is 3 5/8" tall and 1 3/4" at the widest point
Spray Height: 3'-12' Spray Diameter: 6"-2'
- CW-150-CJ:
Fits a 1.50" PVC and is 7" tall and 3 1/8" at the widest point
Spray Height: 3'-24' Spray Diameter: 1'-3'
- CW-300-CJ:
Fits a 3" PVC and is 1' 3/4" tall and is 5 5/8" at the widest point
Spray Height: 3'-36' Spray Diameter: 2'-9'
|
Cluster Jets
Solid Brass
Cluster Jets
This cluster jet will add an amazing effect to any fountain or pond. The cluster effect can be adjusted according to your taste. This is a water level
independent jet, that is both beautiful alone or in clusters. The jet incorporates a swivel, that allows for easy vertical adjustments, it screws on to a male thread nipple for easy installation. I am listing one in this listing, however, I have many more.
- CW-150-CJN: Fits 1.5" PVC Height: 7.5:
Width: 4 5/8"
Spray Height: 21' Spray Diameter: 7'
|
Column Jets
Solid Brass
Column Jets
The column jet shoots a hollow aerated stream. This column jet is generally used as a highly visible arching jet for lake fountains or large fountains, requiring this effect. A wonderful layout for these, is a round fountain using a number of these on the outside wall, shooting to the center with a large cascade jet apex, in the middle.
This jet is a water level independent jet, that is both beautiful alone, clusters, or in a row. The jet incorporates a swivel, that allows for easy vertical adjustments, though should be set at the approximate angle desired. It screws on to a male thread nipple for easy installation.
- CW-150-CN: Fits 1.5" PVC, Height: 6.5" Width: 2"
Spray Height: 6'-30' Spray Diameter: 1"-6"
|
Fan Jets
Solid Brass
Fan Jets
You are looking at a solid brass fan jet/nozzle. You will get a gorgeous "spread out effect of clear water that becomes tiny droplets on the descent". This is a water level
independent jet, that is both beautiful alone, clusters, or in a row. The jet incorporates a swivel, that allows for easy vertical adjustments, though should be set at the approximate angle desired. It screws on to a male thread nipple for easy installation.
- CW-100-FJ: Fits 1" PVC Height: 6" Width: 3"
Spray Height: 1'-2'6" Spray Diameter: 1'6"
|
Finger Jets
Solid Brass Finger Jets
This jet shoots clear stream of water. They can be used straight up, as an arching jet, or on a spray ring. This is a water level
dependent jet, that is both beautiful alone, cluster or in a row. The jet incorporates a swivel, that allows for easy vertical or horizontal adjustments, it screws on to a male thread nipple for easy installation. We do have many more than the listing states. If interested in a larger quantity, please contact us and we will make you a customized listing
This jet comes in two sizes.
- CW-050-FGJ: Fits 1/2" PVC is 3.5" tall and is 1 1/8" at widest point
Spray Height: 3'-12'
- CW-100-FGJ: Fits 1" PVC is 5" tall and is 1 3/4" at widest point
Spray Height: 9'-18'
|
Line Jet w/ shut off
Solid Brass Line Jet w/ shut off
We are very excited about offering this new jet, because it has its own shut off valve it can be
independently adjusted to height on a single discharge manifold or spray ring. With the incorporation of this valve the options to what you can achieve, are almost unlimited, without the
encumbrance of large valves, and/or excessive piping. This jet will give a steady stream, arch, or can be used in spray rings. This is a water level independent jet, that is both beautiful alone, in clusters or in a row. The jet incorporates a swivel, that allows for easy vertical adjustments, it screws on to a male thread nipple for easy installation. We do have several more of sizes. If interested in a larger quantity, please contact us, and I will make you a custom made listing.
This jet comes in two sizes.
- CW-050-LJS: Fits a 1/2" PVC measure in at 3.5" tall and is 15/16" at widest point
Spray Height: 3'-12'
- CW-100-LJS: Fits a 1" PVC measure in at 4 5/8" tall and is 1.5" at widest point
Spray Height: 9'-18'
|
Rain Curtain Nozzle & Weight
Solid
Rain Curtain Nozzle & Weight
This a listing for one weight and one nozzle, they come as a set. This jet is guaranteed to give you control of the water flow, that is imperative when making a rain curtain. The nozzle easily bolts on to your
stainless steel weir, with a rubber washer for sealing it onto the weir box. Please contact us with the size of your weir. If needed, we can give you a quote for a stainless steel weir and stabilizer. Then, we will know the quantity of the jet and weights needed for your project. Note that the layout, and size of this type of fountain, is practically limitless. You can drop these up to 100' and angle the
Mylar strips up to 20 degrees. This is the ultimate indoor splashless fountain.
|
|
 Can't
find the right Water Fountain Replacement Part?
Waterfalls,
Water Fountains, Water Features & Waterscapes
Different
water fountain suppliers carry products that
can be strong in some areas and weak in others. Our history
and knowledge will give you the best products available for
your unique project and budget. Since we are a designer –
builder, we will be streamlining your project, to give you
the highest quality at the lowest price. Some projects will
require hi-tech computerized controllers and some will be
much more simplistic. Contact Crystal Waterscapes, we
can help you find the replacement part for your water
feature.
CRYSTAL WATERSCAPES, WATER FOUNTAINS,
WATERFALLS AND WATER FEATURES
|
|
